Technical information:
-Transmitter board need power supply 12VDC, current consume 20mA.
-Receiver board need power supply 12VDC, stand by current 15mA.
-Output is high when infrared sensor can detect the signal , Low when no signal.
-Relay output can adjust the delay 1-10 second to turn on.
-Reflective mode , distance max 3M, ( Install 2 boards at the same position ), Signal will be reflected from the object to receiver board.
-Barrier mode, put 2 boards in the same direction and distance between 2 boards are 10 – 80 feet.
Example of application: Detect the human who walks pass the door and command the light to turn on 5second and then to turn off. You can put 2 boards in another side of the door.