This board was already assembled and tested, it need 9-14VDC battery to driver Fluorescent Lamp 10 to 40W depend on the current of your battery. At least 2.2A battery, board can drive 40 W fluorescent Lamp.

Technical information:
- Require 9-14VDC from Battery
- 10W Lamp, need 0.7A at 12VDC
- 18W Lamp, need 0.9A at 12VDC
- 36W Lamp, need 1.5A at 12VDC and 40W , need 2.2A at 12VDC
- Frequency 12kHz

Work like Fluorescent dimmer, Power on the board by 12VDC to start up Fluorescent, then reduce voltage variable from 12VDC to 6VDC to control brightness.

- Comes with the schematic and how to connect by image ,easy to understand.

Example : Use in camping / Picnic out door at night / Emergency Light

Download User Manual